Visible fixing –

safe, quick and easy to install

Facade design with visible fixing

Curtain-type rear-ventilated facades have long become the system of choice in structural facade construction. Not only do they offer many structural-physical advantages that ensure a balanced indoor climate (permanent removal of humidity, quick drying of damp exterior walls, etc.), they are also easy to install and highly durable; and they enable diverse designs, which is important to architects and house builders. This versatility begins with the choice of cladding, which includes almost any material from brick to aluminium composite panels.

The certified SPIDI® facade system makes it possible to respond perfectly to the requirements of architects, planners and customers. There are two options for mounting the cladding material: a concealed fixed rear-ventilated facade, where the cladding is installed “invisibly” on the subconstruction, or a visibly fixed rear-ventilated facade. The SPIDI® facade system is suitable for all types of rear-ventilated facade – regardless of fastening, facade cladding material and building height. With visibly fixed rear-ventilated facades, the fasteners of the cladding are deliberately incorporated in the appearance of the building.

System overview SPIDI® max and light

Slavonia´s patented wall bracket is available as SPIDI® max (made of aluminium, steel or stainless steel), or SPIDI® light (made of aluminium).

These certified facade systems offer various options for visible fixings:

SPIDI® max – our classic all-rounder

This wall bracket comes in different materials such as high-strength aluminium, steel of the highest corrosion protection level, or stainless steel.

Für mehr Informationen Bild antippen.

SMB-GN1

RIVETED
1-layer substructure
FACADE CLADDING:
Aluminium composite panels, fibre cement, glassfibre reinforced concrete, HPL panels, aluminium & steel sheets, render carrier boards

SMB-GN2

RIVETED
2-layer substructure & wind barrier membrane
FACADE CLADDING:
Aluminium composite pan., fibre cement, glassfibre reinforced concrete, HPL, alum. & steel sheets, render carrier boards

SMB-GNS2

RIVETED with clapboard cladding
2-layer substructure
FACADE CLADDING:
Fibre cement, glassfibre reinforced concrete, HPL panels

SMB-GSH1

TIMBER BATTEN
2-layer substructure

FACADE CLADDING:
Fibre cement, glassfibre reinforced concrete, HPL panels, render carrier boards

SMB-BZ1.1

BOLT HANGER
1-layer substructure T-profile

FACADE CLADDING:
Aluminium composite material & aluminium & steel cassettes

SMB-BZ1.2

BOLT HANGER
1-layer substructure Y-profile

FACADE CLADDING:
Aluminium composite material & aluminium & steel cassettes

SMB-BZ2.1

BOLT HANGER
2-layer substructure U-profile

FACADE CLADDING:
Aluminium composite material & aluminium & steel cassettes

SMB-GK1

CLAMP FIXING
1-layer substructure with stainless steel clamps

FACADE CLADDING:
Stoneware, ceramics

SMB-TW1

RIVETED/SCREWED
1-layer substructure

FACADE CLADDING:
Trapezoidal aluminium & steel sheeting

SMB-TW2

RIVETED/SCREWED
1-layer substructure

FACADE CLADDING:
Trapezoidal aluminium & steel sheeting

SMB-TW1

RIVETED/SCREWED
1-layer substructure

FACADE CLADDING:
Corrugated aluminium & steel sheeting

SMB-TW2

RIVETED/SCREWED
1-layer substructure

FACADE CLADDING:
Corrugated aluminium & steel sheeting

SPIDI® light – for simple requirements

This wall bracket is made of high-strength aluminium.

SMB-LGN1

RIVETED
1-layer substructure
FACADE CLADDING:
Aluminium composite panels, fibre cement, glassfibre reinforced concrete, HPL panels, aluminium & steel sheets, render carrier boards

SMB-LGN2

RIVETED
2-layer substructure & wind barrier membrane
FACADE CLADDING:
Aluminium composite pan., fibre cement, glassfibre reinforced concrete, HPL, alum. & steel sheets, render carrier boards

SMB-LGNS2

RIVETED with clapboard cladding
2-layer substructure
FACADE CLADDING:
Fibre cement, glassfibre reinforced concrete, HPL panels

SMB-LGSH1

TIMBER BATTEN
2-layer substructure

FACADE CLADDING:
Fibre cement, glassfibre reinforced concrete, HPL panels, render carrier boards

SMB-LBZ1.1

BOLT HANGER
1-layer substructure T-profile

FACADE CLADDING:
Aluminium composite material & aluminium & steel cassettes

SMB-LBZ1.2

BOLT HANGER
1-layer substructure Y-profile

FACADE CLADDING:
Aluminium composite material & aluminium & steel cassettes

SMB-LBZ2.1

BOLT HANGER
2-layer substructure U-profile

FACADE CLADDING:
Aluminium composite material & aluminium & steel cassettes

SMB-LGK1

CLAMP FIXING
1-layer substructure with stainless steel clamps

FACADE CLADDING:
Stoneware, ceramics

SMB-LTW1

RIVETED/SCREWED
1-layer substructure

FACADE CLADDING:
Trapezoidal aluminium & steel sheeting

SMB-LTW2

RIVETED/SCREWED
1-layer substructure

FACADE CLADDING:
Trapezoidal aluminium & steel sheeting

SMB-LTW1

RIVETED/SCREWED
1-layer substructure

FACADE CLADDING:
Corrugated aluminium & steel sheeting

SMB-LTW2

RIVETED/SCREWED
1-layer substructure

FACADE CLADDING:
Corrugated aluminium & steel sheeting

The design and material for the facade cladding can be chosen freely: aluminium composite panels, fibre cement, glass fibre reinforced concrete, HPL (high pressure laminate) panels, aluminium and steel sheets or cassettes, plaster-base boards, profiled or corrugated aluminium/steel sheets, ceramics, natural stone or stoneware.

Get expert advice on facade design and rely on the experience and profound knowledge of SPIDI® specialists. This will help you find the perfect solution for your facade.

For more information about our SPIDI® facade systems, see downloads.