Visible fixing –
safe, quick and easy to install
Facade design with visible fixing
Curtain-type rear-ventilated facades have long become the system of choice in structural facade construction. Not only do they offer many structural-physical advantages that ensure a balanced indoor climate (permanent removal of humidity, quick drying of damp exterior walls, etc.), they are also easy to install and highly durable; and they enable diverse designs, which is important to architects and house builders. This versatility begins with the choice of cladding, which includes almost any material from brick to aluminium composite panels.
The certified SPIDI® facade system makes it possible to respond perfectly to the requirements of architects, planners and customers. There are two options for mounting the cladding material: a concealed fixed rear-ventilated facade, where the cladding is installed “invisibly” on the subconstruction, or a visibly fixed rear-ventilated facade. The SPIDI® facade system is suitable for all types of rear-ventilated facade – regardless of fastening, facade cladding material and building height. With visibly fixed rear-ventilated facades, the fasteners of the cladding are deliberately incorporated in the appearance of the building.
SPIDI® max – our classic all-rounder
This wall bracket comes in different materials such as high-strength aluminium, steel of the highest corrosion protection level, or stainless steel.
SMB-GN1
RIVETED
1-layer substructure
FACADE CLADDING:
Aluminium composite panels, fibre cement, glassfibre reinforced concrete, HPL panels, aluminium & steel sheets, render carrier boards
SMB-GN2
RIVETED
2-layer substructure & wind barrier membrane
FACADE CLADDING:
Aluminium composite pan., fibre cement, glassfibre reinforced concrete, HPL, alum. & steel sheets, render carrier boards
SMB-GNS2
RIVETED with clapboard cladding
2-layer substructure
FACADE CLADDING:
Fibre cement, glassfibre reinforced concrete, HPL panels
SMB-GSH1
TIMBER BATTEN
2-layer substructure
FACADE CLADDING:
Fibre cement, glassfibre reinforced concrete, HPL panels, render carrier boards
SMB-BZ1.1
BOLT HANGER
1-layer substructure T-profile
FACADE CLADDING:
Aluminium composite material & aluminium & steel cassettes
SMB-BZ1.2
BOLT HANGER
1-layer substructure Y-profile
FACADE CLADDING:
Aluminium composite material & aluminium & steel cassettes
SMB-BZ2.1
BOLT HANGER
2-layer substructure U-profile
FACADE CLADDING:
Aluminium composite material & aluminium & steel cassettes
SMB-GK1
CLAMP FIXING
1-layer substructure with stainless steel clamps
FACADE CLADDING:
Stoneware, ceramics
SMB-TW1
RIVETED/SCREWED
1-layer substructure
FACADE CLADDING:
Trapezoidal aluminium & steel sheeting
SMB-TW2
RIVETED/SCREWED
1-layer substructure
FACADE CLADDING:
Trapezoidal aluminium & steel sheeting
SMB-TW1
RIVETED/SCREWED
1-layer substructure
FACADE CLADDING:
Corrugated aluminium & steel sheeting
SMB-TW2
RIVETED/SCREWED
1-layer substructure
FACADE CLADDING:
Corrugated aluminium & steel sheeting
The design and material for the facade cladding can be chosen freely: aluminium composite panels, fibre cement, glass fibre reinforced concrete, HPL (high pressure laminate) panels, aluminium and steel sheets or cassettes, plaster-base boards, profiled or corrugated aluminium/steel sheets, ceramics, natural stone or stoneware.
Get expert advice on facade design and rely on the experience and profound knowledge of SPIDI® specialists. This will help you find the perfect solution for your facade.
For more information about our SPIDI® facade systems, see downloads.